Atonik is a broad-spectrum plant growth regulator that can be used in general crops at any growth stage and has shown excellent effects. After treatment, sodium nitrophenolate can quickly penetrate into the plant body, promote the flow of cytoplasm in cells, promote cell division and proliferation, facilitate the synthesis of chlorophyll and proteins, break seed dormancy, promote germination and rooting, promote flower bud formation, early flowering and fruit weight gain, and prevent flower and fruit drop.
For grain crops such as rice, wheat, beans, and corn, oil crops such as rapeseed and sesame, cotton, leafy vegetables, cruciferous vegetables, tomatoes, cucumbers, eggplants, watermelons, melons, and fruits such as citrus, apples, lychees, bananas, longans, mangoes, pineapples, etc., it can significantly increase crop yield, improve quality, and achieve increased production and income.
Use technology
1. Breaking the dormancy period
(1) Barley and wheat: Soaking seeds in a solution of sodium nitrophenolate can break seed dormancy, promote germination and rooting, and make the buds thicker and the seedlings stronger. Before sowing wheat seeds, prepare a 6000 fold solution with 1.8% sodium nitrophenolate, soak the seeds for 12 hours, and let them air dry before sowing.
(2) Rice: Soak 1kg of rice seeds in 1L of 1.8% compound nitrophenol sodium 6000 times solution for 12-24 hours before sowing, then remove and drain, and then promote germination and sowing.
(3) Soybeans: Soaking seeds in a 3mg/L solution for 3 hours has a good root promoting effect. Cucumber: Soak the seeds in 3mg/L solution for 12 hours to promote rapid germination, developed root system, strong seedlings, and improved disease resistance.
2. Adjust the ratio of male and female flowers, preserve flowers and fruits, and increase fruit weight
(1) Citrus: Tested on 12-year-old ordinary Wenzhou mandarin, its fruit setting rate increased by 28.67% compared to the control, higher than that of plant growth hormone and fruit setting agent Spray a solution of 1.4% compound nitrophenol sodium at a 5000 fold dilution after 14 days of citrus flowering, spray again every 7-10 days, and spray every 30 days thereafter.
(2) Apples: Spraying 6mg/L compound nitrophenol sodium solution once every 20 days before flowering, before flowering, during young fruit stage, and during fruit expansion stage can increase yield and improve apple quality. Specifically, the nitrogen content in apple leaves increased by 1.6%, phosphorus increased by 0.3% to 19.5%, and amino acids increased by 0.9% to 3.9%; Various nutrients in the fruit have been increased, including potassium at 6.0% to 66.5%, calcium at 5.0% to 83.0%, phosphorus at 2.2 times, protein at 1.6 times, amino acids at 41.4% to 130.4% (including aspartic acid at 1.6-4.7 times and proline at 1.5-3.2 times), vitamin C at 5.8% to 11.8%. At the same time, the hardness of the fruit has been greatly increased, extending storage and supply periods.
(3) Pear: Experiments have shown that after applying a 5000 fold solution of 1.8% compound nitrophenol sodium, the fruit setting rate increased by 6% -25.53%, the yield increased by 18% -21.5%, the single fruit weight increased by 15.69%, and the soluble solids increased by 0.85% -1.1%.
(4) Grapes: Applying compound nitrophenol sodium can improve fruit setting rate, and the effect is very outstanding. Spraying 1.8% compound nitrophenol sodium solution at 5000 times each time 7 days before and after grape flowering can increase the fruit setting rate by 78.97%. If 0.2% borax is added to a 6000 fold solution, the fruit setting rate can be increased by 80.9%. If 1.8% nitrophenol sodium is added to a 4000 fold solution and 0.3% borax is added, the fruit setting rate can be increased by 84.69%.
(5) Litchi: Spraying a 3000 fold solution of 1.8% compound nitrophenol sodium before and after flowering can increase soluble solids, increase yield, and improve lychee quality.
(6) Tomatoes: Using 1.8% compound nitrophenol sodium at a concentration of 4000 times during the seedling stage, flowering stage, and young fruit formation stage can increase plant height, significantly improve fruit setting rate, and effectively increase yield.
(7) Cucumber: Spraying 1.8% compound nitrophenol sodium 6000 times solution once each during the young fruit stage, early flowering stage, and peak early fruit stage can increase the number of female flowers, improve the rate of fruit set, reduce the rate of fruit ripening, significantly increase yield, and make cucumbers harvested earlier with straight strips, bright green color, sweet and refreshing taste, improving product quality.
(8) Watermelon: Spraying 1.8% compound nitrophenol sodium at a concentration of 6000 times on the seedling stage, elongation stage, flowering stage, and fruiting stage once each can enhance the growth vitality of melon seedlings, reduce the number of withered and diseased plants, increase the rate of fruit set, increase the weight of individual melons, and improve yield and sugar content.
(9) Winter jujube: Spraying 1.8% compound nitrophenol sodium at a concentration of 6000 times during the flowering, young fruit, swelling, and white ripening stages can increase fruit setting rate and yield.
3. Promote crop nutritional growth, increase yield, and improve the quality of agricultural products
(1) Rice: Use compound nitrophenol sodium before transplanting seedlings and during the field period Promote the rapid recovery of rice growth ability, improve uniformity and seed setting rate, and generally increase yield by 12% -22%. Rice seedlings should be sprayed once 4-5 days before transplanting, once during the heading stage and once during the full heading stage. The concentration of compound nitrophenol sodium water agent should be 500-600 times, and it is recommended to spray 50 times per acre each time.
(2) Barley and wheat: Spraying a 3000 fold solution of 1.8% compound nitrophenol sodium once during the seedling stage, jointing stage, and grain filling stage can significantly increase the thousand grain weight. Improve production and enhance quality.
(3) Gaoliang: Foliar spraying of 1.8% compound nitrophenol sodium at a ratio of 4000-6000 times before heading and during flowering period, with a dosage of 50 kg per acre each time, has the function of improving quality and increasing yield.
(4) Soybeans: Spraying 1.8% sodium nitrophenolate 4000 times solution once each during the bud formation stage, early pod setting stage, and young pod stage can increase the weight of 100 seeds and yield of soybeans. At the same time, the quality of soybeans is also improved, with a significant increase in crude protein and crude fat content.
(5) Four season beans: Experiments have shown that spraying 1.4% compound nitrophenol sodium at 5000 times and 6000 times yields increased by 27.36% and 25.9%, respectively, and the harvesting period was advanced by 8-10 days. Spray 40-50kg of compound nitrophenol sodium solution at a ratio of 5000-6000 times per acre every 7-19 days during the seedling and flowering stages of green beans, for a total of 3-4 sprays. The most suitable concentration of 1.8% sodium nitrophenol is 5000-6000 times the liquid; If the concentration exceeds 3000 times, it has an inhibitory effect on the plants; If the concentration is less than 9000 times, the effect is not significant. The optimal application period for green beans is at the beginning of the flowering period, during which the application is beneficial for maintaining flowers and increasing pods. If applied too early or too late, the effect is not as significant as at the beginning of the flowering period.
(6) Tea tree: Spraying compound nitrophenol sodium showed various physiological effects: firstly, the distance between buds and leaves elongated, and the weight of buds increased. According to measurements, the weight of buds increased by 9.4% compared to the control; Secondly, it stimulated the germination of adventitious buds, resulting in a 13.7% increase in germination density; The third is to increase chlorophyll content, enhance photosynthetic capacity, and increase leaf color. According to a 2-year trial average, spring tea increased production by 25.8%, summer tea by 34.5%, autumn tea by 26.6%, with an annual average increase of 29.7%. The common dilution ratio of tea garden is 5000 times, and 50 kg water spray is added to 12.5 mL of medication solution per 667 mu. Pruning before the germination of tea buds in each season can promote the early development of axillary buds. But it has more economic value to use in the early stage of spring tea, that is, spraying one bud and one leaf at the beginning of the extension period, which has strong tea absorption ability and significant yield increase effect. Spring tea is usually sprayed about twice, while summer and autumn tea can be mixed with pest control and pesticides, evenly sprayed on the front and back of the leaves, with moderate moisture without dripping, achieving both pest control and growth promotion effects.
(7) Cotton: Spraying compound nitrophenol sodium once in the early stage, flowering period, and peach swelling period can significantly improve fruit setting rate and increase yield. Experiments have shown that seed cotton can increase yield by 29.3%, and lint cotton can increase yield by 20.2%.
(8) Rapeseed: Spraying 1.4% compound nitrophenol sodium 5000 times solution once during the greening period, initial flowering period, and final flowering period can significantly increase the number of effective seeds, increase thousand grain weight, and increase yield.
(9) Tobacco: Spraying 1.8% compound nitrophenol sodium 12000 times solution twice every 10 days on the leaves of the entire plant during the clumping stage can significantly increase yield and increase the proportion of high-quality tobacco, resulting in a significant increase in output value.
(10) Sugarcane: Spray 1.8% compound nitrophenol sodium 3500 times solution once each during the seedling stage, tillering stage, and elongation stage to increase tillering, promote early maturity and yield increase, and increase sugar content.
(11) Peanuts: Spray 1.8% compound nitrophenol sodium 3000 times solution on the main stem of peanuts once at the 4th, 8th, and 12th leaf stages, with dark green leaves. This can reduce leaf spot disease, increase the number of fruits, increase the weight of pods and kernels, especially increase the number of full fruits, improve the filling rate, and significantly increase yield.
(12) Beet: Spraying 1.8% sodium nitrophenol 6000 times twice during the growth period can increase the plant weight, root weight, and sugar content of beets.
(13) Shiitake mushrooms: Spray a solution of 1.8% sodium nitrophenolate at a ratio of 6000 times during the transition period and seed formation period, respectively, to significantly increase yield and prolong the harvesting period of shiitake mushrooms, thereby improving their quality. The similar products of sodium nitrophenolate include potassium nitrophenolate and ammonium nitrophenolate. The difference between them and sodium nitrophenolate is that the ion connected to the hydroxyl group on the benzene ring is different, and there is a slight difference in their physical properties The chemical properties and biological activity are roughly the same. The application in agricultural production is roughly the same. Due to the more stable physical properties of sodium nitrophenol, most agricultural production uses sodium nitrophenol.
Precautions
(1) When the concentration is too high, it has an inhibitory effect on crop sprouts and growth.
(2) Spray evenly, and for plants with a lot of wax, add an appropriate amount of spreading agent before spraying.
(3) Can be mixed with pesticides and fertilizers for better results.
(4) Stop using tobacco leaves 30 days before harvesting.
(5) Store in a cool and shady place.
