Quality Improvement Gibberellin GA4+7 90%TC CAS No. 510-75-8 For Apples, Grapes And Kiwifruit

Quality Improvement Gibberellin GA4+7 90%TC CAS No. 510-75-8 For Apples, Grapes And Kiwifruit
Product Introduction:
Gibberellin GA4+7 is a plant growth regulator composed of a mixture of gibberellin A4 and gibberellin A7. As an endogenous plant hormone, it plays a crucial role in the growth and development process of plants. GA4+7 can effectively stimulate the rapid growth of roots and stems, induce mitosis in the leaves of some plants, improve seed germination rate, and is widely involved in plant life activities such as growth, germination, elongation, and flowering.​ In agricultural production practice, the application effect of GA4+7 is remarkable. It can break the dormant state of plant seeds, make seeds germinate in advance, and gain valuable time for crop growth. During the flowering period of plants, spraying GA4+7 can effectively prevent hollow fruits, improve the fruit-setting rate, and avoid nutrient waste. For fruits such as grapes, strawberries, apricots, pears, and tomatoes, spraying with a certain concentration of GA4+7 in the early growth stage can induce parthenocarpy and obtain seedless fruits. In addition, GA4+7 can also delay the senescence of fruits and play a fresh-keeping role; change the ratio of female and male flowers of plants, regulate the flowering time; in hybrid rice seed production, it can adjust the flowering period, increase the number of effective panicles and grains, and significantly improve the seed-setting rate.
Send Inquiry
Description
Technical Parameters
 

Key Attribute

 

CAS No.

510-75-8

Brand Name

HYH

Type

PGR

Packing

1kg/bag,25kgs/bag

Place of Origin

Henan,China

‌Molecular formula

C19H22O5&C19H24O5

Shelf Life

2 years

Application

Agriculture

State

Solid

Storage

Seal and dry

 

Usage

 

①For Seed Germination: Soak seeds in a 50-100 mg/L GA4+7 solution for 12-24 hours before sowing. This is especially effective for seeds with strong dormancy, such as certain tree seeds and vegetable seeds, helping to break dormancy and promote uniform germination.​

②During Vegetative Growth Stage: Spray the foliage with a 20-50 mg/L solution when plants are in the seedling stage or vigorous growth period. This can stimulate the elongation of stems and leaves, enhance plant height, and promote the growth of new shoots, which is suitable for crops like lettuce, celery, and some ornamental plants.​

③At Flowering and Fruiting Stage:​

1.For fruit trees (such as grapes, apricots, pears), spray a 20-50 mg/L solution during the flowering period or young fruit stage to improve fruit-setting rate and reduce fruit drop.​

2.For tomatoes and strawberries, apply a 10-30 mg/L solution at the early flowering stage to prevent hollow fruits and increase fruit weight.​

④For Inducing Seedless Fruits: Spray grapes with a 50-100 mg/L solution at the flower bud differentiation stage or just before flowering to induce parthenocarpy 

and obtain seedless grapes. Similar concentrations can be used for strawberries at the appropriate growth stage.​

⑤In Hybrid Rice Seed Production: Spray the male and female parents with a 30-80 mg/L solution at the heading stage to adjust the flowering period, promote the opening of glumes, and improve the outcrossing rate and seed-setting rate.​

⑥For Fruit Preservation: After harvesting fruits like pears and apples, soak them in a 50-100 mg/L solution for a short time and then dry them. This can delay fruit ripening and senescence, extending the storage period.​

It should be noted that the specific usage concentration and frequency may vary depending on the crop variety, growth stage, and local climate conditions. It is recommended to conduct a small-scale test before large-area application to ensure the best results.

 

Apply

①Crop Adaptability: It is widely applicable to various crops, including fruits (grapes, strawberries, apricots, pears, apples, tomatoes, etc.), vegetables (lettuce, celery, etc.), ornamental plants, and food crops (hybrid rice). Different crops have corresponding suitable application stages and concentrations, which need to be adjusted according to specific varieties.​

②Timing of Application:​

1.For breaking seed dormancy, it is applied before sowing.​

2.During the vegetative growth stage, it is used when plants are in the seedling stage or vigorous growth period.​

3.For promoting flowering and fruiting, it is applied during the flowering period, young fruit stage, or early flowering stage of crops.​

4.When inducing seedless fruits, it is used at the flower bud differentiation stage or just before flowering.​

5.In hybrid rice seed production, it is sprayed at the heading stage.​

6.For fruit preservation, it is applied after harvesting.​

③Application Methods:​

1.Seed Soaking: Put the seeds into the prepared GA4+7 solution with the appropriate concentration and soak them for a specified time (12-24 hours for seed germination promotion, short time for fruit preservation). Then take out the seeds or fruits and dry them before proceeding with the next step (sowing or storage).​

2.Foliage Spraying: Use a sprayer to evenly spray the GA4+7 solution on the leaves, flowers, or young fruits of the plants. Ensure that the solution covers the target parts sufficiently, but avoid excessive spraying to prevent runoff. For hybrid rice seed production, spray the solution on both male and female parents.

 

Matters need attention

1.Accurate Concentration Preparation: Strictly follow the recommended concentration range for specific crops and growth stages when preparing the solution. Use precise measuring tools (such as syringes, graduated cylinders) to avoid errors. For example, using a concentration higher than 100 mg/L on some delicate fruits may lead to abnormal fruit enlargement or skin cracking, while a concentration lower than 10 mg/L for seed germination promotion may result in ineffective results. It is advisable to refer to the product manual or local agricultural technical guidelines for exact values.​

2.Weather Conditions Avoidance: Do not apply during periods of strong sunlight, as this can cause rapid evaporation of the solution, reducing absorption efficiency and potentially causing leaf burn. High temperatures (above 30°C) may accelerate the degradation of GA4+7, weakening its effectiveness. Rain within 4-6 hours after application can wash off the solution, requiring re-application, but avoid re-spraying immediately; wait until the plants are dry and adjust the concentration appropriately (usually 50%-70% of the original concentration) to prevent overdosage. Strong winds can cause uneven spraying, with some areas receiving too much and others too little, so choose calm weather for application.​

3.Compatibility with Other Substances: GA4+7 is generally compatible with most insecticides, fungicides, and fertilizers, but it is not suitable to mix with alkaline substances (such as lime sulfur mixture, Bordeaux mixture) as this can 

destroy its chemical structure. Before mixing, conduct a small-scale compatibility test: mix a small amount of the solution and observe for 30 minutes. If there is precipitation, flocculation, or color change, do not mix them. When mixing with other products, add GA4+7 first, stir well, then add other substances in sequence.​

4.Crop Sensitivity Differences: Different varieties within the same crop may have varying sensitivities to GA4+7. For example, some grape varieties are more sensitive to high concentrations, so a lower concentration (around 20-30 mg/L) is recommended, while others can tolerate up to 80-100 mg/L. Before large-scale application, carry out a small-area trial on a few plants of the target variety, observe their growth for 7-10 days, and confirm no adverse reactions (such as leaf curling, abnormal growth) before expanding the application range.​

5.Application Equipment Cleaning: After use, thoroughly clean the sprayers, containers, and measuring tools used for GA4+7. Residues of GA4+7 can affect subsequent use with other pesticides or fertilizers, and may also contaminate non-target plants when the equipment is used elsewhere. Use clean water to rinse at least 3 times, ensuring no residual solution remains.​

6.Storage and Shelf Life: Store the unopened GA4+7 preparation in a cool (temperature 5-25°C), dry place away from direct sunlight and heat sources. Keep it tightly sealed to prevent moisture absorption, which can cause caking and reduce effectiveness. Check the expiration date on the package; expired products may have degraded and should not be used, as they may not work or cause 

unpredictable effects. Once opened, use the product within the recommended time (usually 1-2 months) and seal it tightly after each use.​

7.Safety Protection: When preparing and applying the solution, wear protective clothing, gloves, goggles, and a mask to avoid direct contact with the skin, eyes, or inhalation. In case of accidental contact, rinse the affected area with plenty of clean water immediately. If swallowed, seek medical attention promptly and bring the product package to the doctor. Keep the product out of the reach of children, pets, and livestock to prevent accidental ingestion.​

8.Environmental Protection: Avoid spraying GA4+7 near water sources (such as rivers, lakes, ponds) to prevent it from entering the water body and affecting aquatic organisms. Do not discard unused solution or empty containers;treat them according to local environmental regulations (such as burying in designated areas or handing over to professional waste disposal agencies).

 

Lead Time

 

Quantity (kilograms) 1000 >1000
Lead time (days) 7 To be negotiated

 

 

FAQ

Q: How can I obtain a sample to inspect your product quality?

 

A: Once the price is confirmed, you may request samples to check the quality of our products.

 

Q: When can I receive the price quote?

 

A: Typically, we provide a quote within 24 hours of receiving your inquiry. If you need the price urgently, please mention this in your email, and we will prioritize your inquiry.

 

Q: What are your delivery terms?

 

A: We accept EXW, FOB Qingdao, or FOB Shanghai. You can select the option that is most convenient or cost-effective for you.

 

Q: What is the lead time for mass production?

 

A: To be honest, it depends on the order quantity and the season when the order is placed.

 

 

Hot Tags: Quality Improvement Gibberellin GA4+7 90%TC CAS No. 510-75-8 For Apples, Grapes And Kiwifruit, China Quality Improvement Gibberellin GA4+7 90%TC CAS No. 510-75-8 For Apples, Grapes And Kiwifruit manufacturers, suppliers, factory, fungicide suppliers, fungicide trade, pesticide retailers, crop protection products, insecticide importers, plant growth regulator to resist stress

Send Inquiry
ONE-STOP SERVICE
Warmly Welcome Your Inquiries And Visiting
contact us